skip to main text

Copying Photos

You can scan printed photos and print them all at one time.

  1. Make sure machine is turned on.

  2. Load photo paper.

  3. Select Advanced print on HOME screen.

    LCD and Operation Panel

  4. Select Photo copy and press OK button.

  5. Check on-screen instructions and press OK button.

  6. Load printed photo on platen glass following on-screen instructions and press OK button.

    Note

    When scanning is complete, the Copy standby screen is displayed.

  7. Change print settings as necessary.

    Press the right Function button to display the print setting screen.

    Use the UPDOWN button to change the setting item and use the LEFTRIGHT button to change the setting.

    figure: LCD

    Note

    • Depending on the setting item, some settings cannot be specified in combination with the setting of other setting items. If the setting cannot be specified in combination is selected, Error details appears on the LCD and appears at the setting item. In this case, press the left Function button to check the message and change the setting.

    1. Page size

      Select the page size of the loaded paper.

    2. Type (Media type)

      Select the media type of the loaded paper.

    3. Print qlty (Print quality)

      Select print quality according to the original.

    4. Border (Bordered/Borderless print)

      Select bordered or borderless print.

    5. Photo fix

      Select No correction, Auto photo fix, or Fade restoration.

      Note

      • When No correction is selected, the machine prints the scanned image without correction.

      • When Auto photo fix is selected, the machine corrects the scanned image automatically.

      • When Fade restoration is selected, the machine corrects the scanned image that have faded over time.

  8. Specify the number of copies by using UPDOWN button.

    Note

    • By pressing the left Function button, you can preview an image of the printout on the preview screen. Use the LEFTRIGHT button to change the display.

    • If appears on the photo, the printed photo may not be scanned properly. Rescan the printed photo.

  9. Press Color button for color printing, or Black button for black & white printing.

    The machine starts printing.

    Note

    • If the printed photo was not scanned properly, the confirmation screen asking you if you continue printing is displayed. By selecting Yes, the machine starts printing. If you rescan the photo, select No and scan the photo again.